Steel Plates — Technical Data Sheet
Hot-rolled steel plates are the base material for fabricated structures, tanks, ducts, pressure parts and machined components. Teshi Group stocks structural and boiler-quality plates and profile cuts them to drawing.
Specification
| Product | Hot-rolled steel plates |
|---|---|
| Supply | Stockist and supplier — sourced from primary mills; not manufactured by Teshi Group |
| Specifications | IS 2062; ASTM A36; ASTM A516 / ASME SA516; IS 2002 |
| Thickness | 5 mm to 100 mm (chequered plate from 3 mm) |
| Width × length | 1250, 1500, 2000 and 2500 mm wide; 6300 to 12000 mm long |
| Condition | As rolled, normalised or control rolled, per specification |
| Services | Oxy-fuel and plasma profile cutting to drawing: circles, rings, ring segments and shapes |
Materials
| Structural steel | IS 2062 E250 BR, IS 2062 E350 BR, ASTM A36 |
|---|---|
| Boiler and pressure vessel steel | ASTM A516 Gr.70 |
Typical applications
- Structural fabrication, platforms and supports
- Storage tanks, ducts and chutes
- Pressure vessels and boiler parts (A516)
- Flanges, base plates and machined components
Supply
Steel Plates is stocked and supplied by Teshi Group from approved manufacturers. It is not manufactured by Teshi Group; the original manufacturer's test certificate accompanies every consignment.
Inspection and testing
- Mill testing to the plate specification: chemical analysis, tensile, bend and (where specified) Charpy impact tests.
- Ultrasonic testing to ASTM A435 / A578 when ordered.
- Teshi receiving inspection: plate number and heat number verified against the mill certificate; thickness and surface check.
Marking
Mill stamp or stencil on each plate: manufacturer, specification, grade, heat and plate number, and size.
Documentation
Original mill test certificate to EN 10204 3.1 for each heat supplied. IBR-certified material on request.
Packing
Loose or strapped plates loaded on trailers; profile-cut pieces identified with heat number.
Ordering information
Please state the following on your enquiry:
- Specification and grade (with quality: A, BR, BO or C)
- Thickness, width and length, or cutting drawing
- Normalised or as-rolled condition
- Ultrasonic test or impact test requirements
- Quantity in tonnes or number of plates
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
FAQ
Steel Plates: common questions
How heavy is a steel plate?
Multiply length (m) × width (m) × thickness (mm) × 7.85 to get the weight in kg. See the steel plate weight chart.
Related products, data sheets and standards
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.