IS 2062 E250 BR — Chemical Composition & Mechanical Properties
IS 2062 E250 BR is an Indian Standard specification for structural plate, sections & bars. This sheet summarises its chemical composition limits and minimum mechanical properties. Typical use: general structural steel (India).
Chemical composition of IS 2062 E250 BR (weight %)
Other elements and limits: CE 0.41 max; Charpy V 27 J min at room temperature
Mechanical properties
| Tensile strength, min | 410 MPa |
|---|---|
| Yield strength, min | 250 MPa |
| Elongation, min | 23 % |
| Hardness | Not specified |
Heat treatment
As-rolled (normalizing / controlled rolling optional)
Typical service
General structural steel (India)
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
Related grades
FAQ
IS 2062 E250 BR: common questions
What is the minimum yield strength of IS 2062 E250 BR?
250 MPa, with a minimum tensile strength of 410 MPa.
What is the carbon content of IS 2062 E250 BR?
0.22 max %.
Related products, data sheets and standards
Fabricated Pipe Spools
OEM manufacturer
View online · PDFTechnical data sheetSteel Plates
Stockist & supplier
View online · PDFTechnical data sheetStructural Steel Sections
Stockist & supplier
View online · PDFOEM manufacturerCustom Fabrication
As per drawing · CS / SS / Alloy
OpenStockist & supplierSteel Plates
3–100 mm thick · MS / Boiler quality
OpenStockist & supplierStructural Steel
ISMB 100–600 · IS 2062
Open
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.