ASTM A516 Grade 60 — Chemical Composition & Mechanical Properties
ASTM A516 Grade 60 is a structural & plate steel grade for pressure-vessel plate (UNS K02100, EN / W.Nr ≈ P265GH). It is also known as A516-60. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group supplies this grade as a stockist and supplier.
ASTM A516 Grade 60 at a glance
| Specification | ASTM A516 Grade 60 |
|---|---|
| Material family | Structural & plate steel |
| Product form | Pressure-vessel plate |
| UNS number | K02100 |
| EN / W.Nr equivalent | ≈ P265GH |
| Also known as | A516-60 |
| Document | TG-MG-112 · Rev. 1 · October 2026 |
Typical service
Pressure vessels and tanks needing good notch toughness
Heat treatment
As rolled or normalised (normalised above 40 mm)
Chemical composition of ASTM A516 Grade 60 (weight %)
Single values are maximums unless shown as a range or “min”.
Mechanical properties
| Tensile strength, min | 415 MPa |
|---|---|
| Yield strength (0.2 % offset), min | 220 MPa |
| Elongation, min | 21 % |
| Tensile strength, max | 550 MPa |
| Hardness | Not specified |
About structural & plate steel
Structural steels such as IS 2062 and ASTM A36 are carbon–manganese steels for beams, columns, plates and fabricated structures, specified mainly by yield strength and weldability (carbon equivalent).
Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.
International equivalents of ASTM A516 Grade 60
All equivalents| Standard system | Nearest equivalent grade |
|---|---|
| USA — ASTM / ASME | ASTM A516 Grade 60 · ASME SA-516 Grade 60 |
| USA — UNS | K02100 |
| Europe — EN designation | P265GH (EN 10028-2) |
| Europe — W.Nr | 1.0425 |
| Japan — JIS | SGV410 (JIS G3118) |
| China — GB / NB | Q245R (GB/T 713.2) |
| China — old GB designation | 20R |
| India — IS | IS 2002 Gr 1 |
| UK — BS (withdrawn) | BS 1501-161-430 |
Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.
Other structural & plate steel grades
Structural & plate steel overviewStandards for ASTM A516 Grade 60
All material standardsFAQ
ASTM A516 Grade 60: common questions
What is the minimum yield strength of ASTM A516 Grade 60?
220 MPa, with a minimum tensile strength of 415 MPa.
What is the carbon content of ASTM A516 Grade 60?
0.21 max (≤12.5 mm) to 0.27 max (>200 mm) %.
What is the UNS number and EN equivalent of ASTM A516 Grade 60?
UNS K02100; the nearest European designation is W.Nr ≈ P265GH. Equivalents are close but not identical — check the specification if substituting.
How is ASTM A516 Grade 60 heat treated?
As rolled or normalised (normalised above 40 mm).
What is the Chinese (GB) equivalent of ASTM A516 Grade 60?
The nearest Chinese equivalent is Q245R (GB/T 713.2), formerly 20R. Equivalents are close but not identical — compare chemistry and properties before substituting.
What is the JIS equivalent of ASTM A516 Grade 60?
The nearest Japanese (JIS) equivalent is SGV410 (JIS G3118).
Does Teshi Group supply ASTM A516 Grade 60?
Teshi Group supplies this grade as a stockist and supplier. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.
Related products, data sheets and standards
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.