ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1538FlangesTG-DS-044 · size page

DN 80 IS 1538 Flange Dimensions (Cast Iron Fittings)

DN 80 (3") to IS 1538: OD 200 mm; thickness 21 mm; PCD 160 mm; bolts 4; holes 19 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø200K (PCD) = Ø1604 holes × Ø19C = 21d1 = Ø133DN 80 IS 1538 Flange Dimensions (Cast Iron Fittings) — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 80 IS 1538 Flange Dimensions (Cast Iron Fittings) — all dimensions

IS 1538 Tables 4 & 6 — flanges of pipes and fittings: dimensions and standard drilling

DimensionValueEquivalent
Flange OD — D200 mm7.87 in
Flange — C21 mm0.827 in
Bolt circle — K160 mm6.30 in
Number of bolts4
Hole dia — L19 mm0.748 in
Bolt dia16

IS 1538 Table 5 — raised flanges

DimensionValueEquivalent
Flange OD — D200 mm7.87 in
Raised face — d1133 mm5.24 in
Incl. raised face — C24 mm0.945 in
Flange — C21 mm0.827 in
RF height — f3 mm0.118 in
Bolt circle — K160 mm6.30 in
Number of bolts4
Hole dia — L19 mm0.748 in
Bolt dia16

IS 1538 Table 21 — double flanged 1/4 (90°) bends

DimensionValueEquivalent
Wall thickness — e10.0 mm0.394 in
Bend radius — r137 mm5.39 in
Straight — a43 mm1.69 in
Centre to face — b180 mm7.09 in
Mass approx. — kg13 mm0.512 in

Values are nominal, from IS 1538 Flange Dimensions (Cast Iron Fittings). Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 80 IS 1538 Flange Dimensions (Cast Iron Fittings): common questions

What are the DN 80 IS 1538 Flange Dimensions (Cast Iron Fittings)?

DN 80 (3") to IS 1538: OD 200 mm; thickness 21 mm; PCD 160 mm; bolts 4; holes 19 mm.

Does Teshi Group manufacture DN 80 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 1538, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 80 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1538 Flange Dimensions (Cast Iron Fittings) chart.

Need DN 80 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote