ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1538FlangesTG-DS-044 · size page

DN 600 IS 1538 Flange Dimensions (Cast Iron Fittings)

DN 600 (24") to IS 1538: OD 780 mm; thickness 36 mm; PCD 725 mm; bolts 20; holes 31 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø780K (PCD) = Ø72520 holes × Ø31C = 36d1 = Ø682DN 600 IS 1538 Flange Dimensions (Cast Iron Fittings) — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 600 IS 1538 Flange Dimensions (Cast Iron Fittings) — all dimensions

IS 1538 Tables 4 & 6 — flanges of pipes and fittings: dimensions and standard drilling

DimensionValueEquivalent
Flange OD — D780 mm30.71 in
Flange — C36 mm1.42 in
Bolt circle — K725 mm28.54 in
Number of bolts20
Hole dia — L31 mm1.22 in
Bolt dia27

IS 1538 Table 5 — raised flanges

DimensionValueEquivalent
Flange OD — D780 mm30.71 in
Raised face — d1682 mm26.85 in
Incl. raised face — C41 mm1.61 in
Flange — C36 mm1.42 in
RF height — f5 mm0.197 in
Bolt circle — K725 mm28.54 in
Number of bolts20
Hole dia — L31 mm1.22 in
Bolt dia27

IS 1538 Table 21 — double flanged 1/4 (90°) bends

DimensionValueEquivalent
Wall thickness — e22.2 mm0.874 in
Bend radius — r605 mm23.82 in
Straight — a95 mm3.74 in
Centre to face — b700 mm27.56 in
Mass approx. — kg442 mm17.40 in

Values are nominal, from IS 1538 Flange Dimensions (Cast Iron Fittings). Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 600 IS 1538 Flange Dimensions (Cast Iron Fittings): common questions

What are the DN 600 IS 1538 Flange Dimensions (Cast Iron Fittings)?

DN 600 (24") to IS 1538: OD 780 mm; thickness 36 mm; PCD 725 mm; bolts 20; holes 31 mm.

Does Teshi Group manufacture DN 600 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 1538, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 600 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1538 Flange Dimensions (Cast Iron Fittings) chart.

Need DN 600 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote