ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1538FlangesTG-DS-044 · size page

DN 700 IS 1538 Flange Dimensions (Cast Iron Fittings)

DN 700 (28") to IS 1538: OD 895 mm; thickness 38.5 mm; PCD 840 mm; bolts 24; holes 31 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø895K (PCD) = Ø84024 holes × Ø31C = 38.5d1 = Ø797DN 700 IS 1538 Flange Dimensions (Cast Iron Fittings) — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 700 IS 1538 Flange Dimensions (Cast Iron Fittings) — all dimensions

IS 1538 Tables 4 & 6 — flanges of pipes and fittings: dimensions and standard drilling

DimensionValueEquivalent
Flange OD — D895 mm35.24 in
Flange — C38.5 mm1.52 in
Bolt circle — K840 mm33.07 in
Number of bolts24
Hole dia — L31 mm1.22 in
Bolt dia27

IS 1538 Table 5 — raised flanges

DimensionValueEquivalent
Flange OD — D895 mm35.24 in
Raised face — d1797 mm31.38 in
Incl. raised face — C43.5 mm1.71 in
Flange — C38.5 mm1.52 in
RF height — f5 mm0.197 in
Bolt circle — K840 mm33.07 in
Number of bolts24
Hole dia — L31 mm1.22 in
Bolt dia27

IS 1538 Table 21 — double flanged 1/4 (90°) bends

DimensionValueEquivalent
Wall thickness — e24.5 mm0.965 in
Bend radius — r695 mm27.36 in
Straight — a105 mm4.13 in
Centre to face — b800 mm31.50 in
Mass approx. — kg639 mm25.16 in

Values are nominal, from IS 1538 Flange Dimensions (Cast Iron Fittings). Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 700 IS 1538 Flange Dimensions (Cast Iron Fittings): common questions

What are the DN 700 IS 1538 Flange Dimensions (Cast Iron Fittings)?

DN 700 (28") to IS 1538: OD 895 mm; thickness 38.5 mm; PCD 840 mm; bolts 24; holes 31 mm.

Does Teshi Group manufacture DN 700 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 1538, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 700 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1538 Flange Dimensions (Cast Iron Fittings) chart.

Need DN 700 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote