ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 1538FlangesTG-DS-044 · size page

DN 1000 IS 1538 Flange Dimensions (Cast Iron Fittings)

DN 1000 (40") to IS 1538: OD 1230 mm; thickness 47 mm; PCD 1160 mm; bolts 28; holes 37 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø1230K (PCD) = Ø116028 holes × Ø37C = 47d1 = Ø1111DN 1000 IS 1538 Flange Dimensions (Cast Iron Fittings) — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 1000 IS 1538 Flange Dimensions (Cast Iron Fittings) — all dimensions

IS 1538 Tables 4 & 6 — flanges of pipes and fittings: dimensions and standard drilling

DimensionValueEquivalent
Flange OD — D1230 mm48.43 in
Flange — C47 mm1.85 in
Bolt circle — K1160 mm45.67 in
Number of bolts28
Hole dia — L37 mm1.46 in
Bolt dia33

IS 1538 Table 5 — raised flanges

DimensionValueEquivalent
Flange OD — D1230 mm48.43 in
Raised face — d11111 mm43.74 in
Incl. raised face — C52 mm2.05 in
Flange — C47 mm1.85 in
RF height — f5 mm0.197 in
Bolt circle — K1160 mm45.67 in
Number of bolts28
Hole dia — L37 mm1.46 in
Bolt dia33

IS 1538 Table 21 — double flanged 1/4 (90°) bends

DimensionValueEquivalent
Wall thickness — e31.5 mm1.24 in
Bend radius — r965 mm37.99 in
Straight — a135 mm5.31 in
Centre to face — b1100 mm43.31 in
Mass approx. — kg1544 mm60.79 in

Values are nominal, from IS 1538 Flange Dimensions (Cast Iron Fittings). Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 1000 IS 1538 Flange Dimensions (Cast Iron Fittings): common questions

What are the DN 1000 IS 1538 Flange Dimensions (Cast Iron Fittings)?

DN 1000 (40") to IS 1538: OD 1230 mm; thickness 47 mm; PCD 1160 mm; bolts 28; holes 37 mm.

Does Teshi Group manufacture DN 1000 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 1538, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 1000 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 1538 Flange Dimensions (Cast Iron Fittings) chart.

Need DN 1000 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote