ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-051 · size page

18 inch BS 10 Table R Flange Dimensions

18 inch (DN 450) to BS 10: OD 737 mm; PCD 673 mm; bolts 20; holes 38 mm; bolt size 35.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø737K (PCD) = Ø67320 holes × Ø3818 inch BS 10 Table R Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

18 inch BS 10 Table R Flange Dimensions — all dimensions

BS 10 Table R — flange dimensions

DimensionValueEquivalent
Size450
Flange OD — D737 mm29.02 in
Bolt circle — K673 mm26.50 in
Number of bolts20
Hole dia — L38 mm1.50 in
Bolt dia35

Values are nominal, from BS 10 Table R Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

18 inch BS 10 Table R Flange Dimensions: common questions

What are the 18 inch BS 10 Table R Flange Dimensions?

18 inch (DN 450) to BS 10: OD 737 mm; PCD 673 mm; bolts 20; holes 38 mm; bolt size 35.

Does Teshi Group manufacture 18 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 18 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table R Flange Dimensions chart.

Need 18 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote