3/4 inch BS 10 Table R Flange Dimensions
3/4 inch (DN 20) to BS 10: OD 114 mm; thickness 19.1 mm; PCD 83 mm; bolts 4; holes 17 mm.
Key to dimensions
- D
- Outside diameter of flange
- C
- Flange thickness, excluding raised face unless stated
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
3/4 inch BS 10 Table R Flange Dimensions — all dimensions
BS 10 Table R — flange dimensions
| Dimension | Value | Equivalent |
|---|---|---|
| Size | 20 | |
| Flange OD — D | 114 mm | 4.49 in |
| Flange — C | 19.1 mm | 0.752 in |
| Bolt circle — K | 83 mm | 3.27 in |
| Number of bolts | 4 | |
| Hole dia — L | 17 mm | 0.669 in |
| Bolt size | 5/8 | |
| Bolt dia | 16 |
Values are nominal, from BS 10 Table R Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — BS 10 Table R Flange Dimensions
Same size in other ratings
Related for this size
¾" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.20¾" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.21¾" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M¾" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
3/4 inch BS 10 Table R Flange Dimensions: common questions
What are the 3/4 inch BS 10 Table R Flange Dimensions?
3/4 inch (DN 20) to BS 10: OD 114 mm; thickness 19.1 mm; PCD 83 mm; bolts 4; holes 17 mm.
Does Teshi Group manufacture 3/4 inch flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 3/4 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table R Flange Dimensions chart.
Need 3/4 inch flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.