ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-051 · size page

20 inch BS 10 Table R Flange Dimensions

20 inch (DN 500) to BS 10: OD 806 mm; PCD 730 mm; bolts 20; holes 41 mm; bolt size 38.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø806K (PCD) = Ø73020 holes × Ø4120 inch BS 10 Table R Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

20 inch BS 10 Table R Flange Dimensions — all dimensions

BS 10 Table R — flange dimensions

DimensionValueEquivalent
Size500
Flange OD — D806 mm31.73 in
Bolt circle — K730 mm28.74 in
Number of bolts20
Hole dia — L41 mm1.61 in
Bolt dia38

Values are nominal, from BS 10 Table R Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

20 inch BS 10 Table R Flange Dimensions: common questions

What are the 20 inch BS 10 Table R Flange Dimensions?

20 inch (DN 500) to BS 10: OD 806 mm; PCD 730 mm; bolts 20; holes 41 mm; bolt size 38.

Does Teshi Group manufacture 20 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 20 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table R Flange Dimensions chart.

Need 20 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote