ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-045 · size page

18 inch BS 10 Table D Flange Dimensions

18 inch (DN 450) to BS 10: OD 25 1/4 in; thickness 1 1/8 in; PCD 23 in; bolts 12; holes 1 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø641K (PCD) = Ø58412 holes × Ø25C = 2918 inch BS 10 Table D Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

18 inch BS 10 Table D Flange Dimensions — all dimensions

BS 10 Table D — flange dimensions

DimensionValueEquivalent
Size450
Flange OD — D25 1/4 in641.3 mm
Flange OD — D641 mm25.24 in
Steel, heavy series — C1 1/8 in28.6 mm
Steel, heavy series — C29 mm1.14 in
Steel, light series — C1 in25.4 mm
Cast iron — C1 1/4 in31.8 mm
Bolt circle — K23 in584.2 mm
Bolt circle — K584 mm22.99 in
Number of bolts12
Hole dia — L1 in25.4 mm
Hole dia — L25 mm0.984 in
Bolt size7/8

Values are nominal, from BS 10 Table D Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

18 inch BS 10 Table D Flange Dimensions: common questions

What are the 18 inch BS 10 Table D Flange Dimensions?

18 inch (DN 450) to BS 10: OD 25 1/4 in; thickness 1 1/8 in; PCD 23 in; bolts 12; holes 1 in.

Does Teshi Group manufacture 18 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 18 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table D Flange Dimensions chart.

Need 18 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote