ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-045 · size page

10 inch BS 10 Table D Flange Dimensions

10 inch (DN 250) to BS 10: OD 16 in; thickness 3/4 in; PCD 14 in; bolts 8; holes 7/8 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø406K (PCD) = Ø3568 holes × Ø22C = 1910 inch BS 10 Table D Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

10 inch BS 10 Table D Flange Dimensions — all dimensions

BS 10 Table D — flange dimensions

DimensionValueEquivalent
Size250
Flange OD — D16 in406.4 mm
Flange OD — D406 mm15.98 in
Steel, heavy series — C3/4 in19.0 mm
Steel, heavy series — C19 mm0.748 in
Steel, light series — C5/8 in15.9 mm
Cast iron — C1 in25.4 mm
Bolt circle — K14 in355.6 mm
Bolt circle — K356 mm14.02 in
Number of bolts8
Hole dia — L7/8 in22.2 mm
Hole dia — L22 mm0.866 in
Bolt size3/4

Values are nominal, from BS 10 Table D Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

10 inch BS 10 Table D Flange Dimensions: common questions

What are the 10 inch BS 10 Table D Flange Dimensions?

10 inch (DN 250) to BS 10: OD 16 in; thickness 3/4 in; PCD 14 in; bolts 8; holes 7/8 in.

Does Teshi Group manufacture 10 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 10 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table D Flange Dimensions chart.

Need 10 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote