ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
BS 10FlangesTG-DS-045 · size page

3 1/2 inch BS 10 Table D Flange Dimensions

3 1/2 inch (DN 90) to BS 10: OD 8 in; thickness 3/8 in; PCD 6 1/2 in; bolts 4; bolt size 5/8.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø8"K (PCD) = Ø6 1/2"4 holesC = 3/8"3 1/2 inch BS 10 Table D Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

3 1/2 inch BS 10 Table D Flange Dimensions — all dimensions

BS 10 Table D — flange dimensions

DimensionValueEquivalent
Flange OD — D8 in203.2 mm
Steel, light series — C3/8 in9.5 mm
Bolt circle — K6 1/2 in165.1 mm
Number of bolts4
Bolt size5/8

Values are nominal, from BS 10 Table D Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

3 1/2 inch BS 10 Table D Flange Dimensions: common questions

What are the 3 1/2 inch BS 10 Table D Flange Dimensions?

3 1/2 inch (DN 90) to BS 10: OD 8 in; thickness 3/8 in; PCD 6 1/2 in; bolts 4; bolt size 5/8.

Does Teshi Group manufacture 3 1/2 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to BS 10, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 3 1/2 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full BS 10 Table D Flange Dimensions chart.

Need 3 1/2 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote