ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Super austeniticForged flanges & fittingsTG-MG-068 · Rev. 1 · October 2026

ASTM A182 F62 (Alloy 6XN) — Chemical Composition & Mechanical Properties

ASTM A182 F62 (Alloy 6XN) is a super austenitic stainless steel grade for forged flanges & fittings (UNS N08367). It is also known as 6Mo · AL-6XN (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-068 · © Teshi Group · controlled document

ASTM A182 F62 (Alloy 6XN) at a glance

SpecificationASTM A182 F62 (Alloy 6XN)
Material familySuper austenitic stainless steel
Product formForged flanges & fittings
UNS numberN08367
Also known as6Mo · AL-6XN (trade name)
PREN (min values)42.7
DocumentTG-MG-068 · Rev. 1 · October 2026

Typical service

Seawater cooling, offshore and chemical service needing 6Mo resistance

Heat treatment

Solution annealed 1105 °C min, rapid cool

Chemical composition of ASTM A182 F62 (Alloy 6XN) (weight %)

C0.030 max
Mn2.00 max
P0.040 max
S0.030 max
Si1.00 max
Cr20.0–22.0
Ni23.5–25.5
Mo6.0–7.0
N0.18–0.25
Cu0.75 max

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min655 MPa
Yield strength (0.2 % offset), min310 MPa
Elongation, min30 %
HardnessNot specified

About super austenitic stainless steel

Super austenitic stainless steels are high-alloy austenitic grades with much more nickel, molybdenum and nitrogen than 316L. That raises the pitting resistance equivalent number (PREN) from about 24 to 35–45, giving resistance to seawater, chlorides and strong acids where 316L would pit or crack.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A182 F62 (Alloy 6XN)

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A182 F62 (Alloy 6XN) · ASME SA-182 F62 (Alloy 6XN)
USA — UNSN08367
Europe — EN designation≈ X1NiCrMoCuN25-20-7
Europe — W.Nr≈ 1.4529

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Flanges & forged fittingsASTM A182 F62 / B462 N08367
Butt-weld fittingsASTM B366 WPN08367
PipeASTM B675 / B690 N08367
PlateASTM B688 N08367

FAQ

ASTM A182 F62 (Alloy 6XN): common questions

What is the minimum yield strength of ASTM A182 F62 (Alloy 6XN)?

310 MPa, with a minimum tensile strength of 655 MPa.

What is the carbon content of ASTM A182 F62 (Alloy 6XN)?

0.030 max %.

What is the PREN of ASTM A182 F62 (Alloy 6XN)?

About 43, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.

How is ASTM A182 F62 (Alloy 6XN) heat treated?

Solution annealed 1105 °C min, rapid cool.

Does Teshi Group supply ASTM A182 F62 (Alloy 6XN)?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.