ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Super austeniticForged flanges & fittingsTG-MG-067 · Rev. 1 · October 2026

ASTM A182 F44 (254 SMO) — Chemical Composition & Mechanical Properties

ASTM A182 F44 (254 SMO) is a super austenitic stainless steel grade for forged flanges & fittings (UNS S31254, EN / W.Nr 1.4547). It is also known as 6Mo · 254 SMO (trade name). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-067 · © Teshi Group · controlled document

ASTM A182 F44 (254 SMO) at a glance

SpecificationASTM A182 F44 (254 SMO)
Material familySuper austenitic stainless steel
Product formForged flanges & fittings
UNS numberS31254
EN / W.Nr equivalent1.4547
Also known as6Mo · 254 SMO (trade name)
PREN (min values)42.2
DocumentTG-MG-067 · Rev. 1 · October 2026

Typical service

Seawater, desalination, offshore firewater and bleach-plant service

Heat treatment

Solution annealed 1150 °C min, rapid cool

Chemical composition of ASTM A182 F44 (254 SMO) (weight %)

C0.020 max
Mn1.00 max
P0.030 max
S0.010 max
Si0.80 max
Cr19.5–20.5
Ni17.5–18.5
Mo6.0–6.5
N0.18–0.25
Cu0.50–1.00

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min650 MPa
Yield strength (0.2 % offset), min300 MPa
Elongation, min35 %
HardnessNot specified

About super austenitic stainless steel

Super austenitic stainless steels are high-alloy austenitic grades with much more nickel, molybdenum and nitrogen than 316L. That raises the pitting resistance equivalent number (PREN) from about 24 to 35–45, giving resistance to seawater, chlorides and strong acids where 316L would pit or crack.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A182 F44 (254 SMO)

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A182 F44 (254 SMO) · ASME SA-182 F44 (254 SMO)
USA — UNSS31254
Europe — EN designationX1CrNiMoCuN20-18-7
Europe — W.Nr1.4547
Japan — JISSUS312L
China — GB / NBS31252 (015Cr20Ni18Mo6CuN)

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

Same alloy in other product forms

Product formSpecification / grade
Flanges & forged fittingsASTM A182 F44
Butt-weld fittingsASTM A403 WPS31254
PipeASTM A312 S31254
PlateASTM A240 S31254
BarASTM A479 S31254

FAQ

ASTM A182 F44 (254 SMO): common questions

What is the minimum yield strength of ASTM A182 F44 (254 SMO)?

300 MPa, with a minimum tensile strength of 650 MPa.

What is the carbon content of ASTM A182 F44 (254 SMO)?

0.020 max %.

What is the PREN of ASTM A182 F44 (254 SMO)?

About 42, calculated as Cr + 3.3Mo + 16N using the specification minimum values. Typical heats are a little higher.

What is the UNS number and EN equivalent of ASTM A182 F44 (254 SMO)?

UNS S31254; the nearest European designation is W.Nr 1.4547. Equivalents are close but not identical — check the specification if substituting.

How is ASTM A182 F44 (254 SMO) heat treated?

Solution annealed 1150 °C min, rapid cool.

What is the Chinese (GB) equivalent of ASTM A182 F44 (254 SMO)?

The nearest Chinese equivalent is S31252 (015Cr20Ni18Mo6CuN). Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of ASTM A182 F44 (254 SMO)?

The nearest Japanese (JIS) equivalent is SUS312L.

Does Teshi Group supply ASTM A182 F44 (254 SMO)?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.