ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Chrome-molyForged flanges & fittingsTG-MG-130 · Rev. 1 · October 2026

ASTM A182 F5a — Chemical Composition & Mechanical Properties

ASTM A182 F5a is a chrome-moly alloy steel grade for forged flanges & fittings (UNS K42544). It is also known as 5Cr-½Mo (high strength). This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-130 · © Teshi Group · controlled document

ASTM A182 F5a at a glance

SpecificationASTM A182 F5a
Material familyChrome-moly alloy steel
Product formForged flanges & fittings
UNS numberK42544
Also known as5Cr-½Mo (high strength)
DocumentTG-MG-130 · Rev. 1 · October 2026

Typical service

Higher-strength 5Cr-½Mo forgings for refinery service

Heat treatment

Annealed, normalised and tempered, or quenched and tempered

Chemical composition of ASTM A182 F5a (weight %)

C0.25 max
Mn0.60 max
P0.040 max
S0.030 max
Si0.50 max
Cr4.0–6.0
Ni0.50 max
Mo0.44–0.65

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min620 MPa
Yield strength (0.2 % offset), min450 MPa
Elongation, min22 %
Hardness187–248 HBW

About chrome-moly alloy steel

Chrome-moly steels are low-alloy steels with 1–9 % chromium and 0.5–1 % molybdenum. Chromium gives oxidation and sulphidation resistance; molybdenum gives creep strength at high temperature. They are the standard choice for steam and hot hydrocarbon service above the carbon-steel range.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A182 F5a

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A182 F5a · ASME SA-182 F5a
USA — UNSK42544
Europe — EN designationX11CrMo5 (EN 10216-2)
Europe — W.Nr1.7362
Japan — JISSTPA25 / SFVAF5B
China — GB / NB12Cr5MoI (GB/T 9948) / 1Cr5Mo
China — old GB designation1Cr5Mo
UK — BS (withdrawn)BS 3604 625

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

FAQ

ASTM A182 F5a: common questions

What is the minimum yield strength of ASTM A182 F5a?

450 MPa, with a minimum tensile strength of 620 MPa.

What is the carbon content of ASTM A182 F5a?

0.25 max %.

How is ASTM A182 F5a heat treated?

Annealed, normalised and tempered, or quenched and tempered.

What is the Chinese (GB) equivalent of ASTM A182 F5a?

The nearest Chinese equivalent is 12Cr5MoI (GB/T 9948) / 1Cr5Mo, formerly 1Cr5Mo. Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of ASTM A182 F5a?

The nearest Japanese (JIS) equivalent is STPA25 / SFVAF5B.

Does Teshi Group supply ASTM A182 F5a?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.