ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Chrome-molyForged flanges & fittingsTG-MG-129 · Rev. 1 · October 2026

ASTM A182 F2 — Chemical Composition & Mechanical Properties

ASTM A182 F2 is a chrome-moly alloy steel grade for forged flanges & fittings (UNS K12122). It is also known as ½Cr-½Mo. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group manufactures flanges and fittings in this grade.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-129 · © Teshi Group · controlled document

ASTM A182 F2 at a glance

SpecificationASTM A182 F2
Material familyChrome-moly alloy steel
Product formForged flanges & fittings
UNS numberK12122
Also known as½Cr-½Mo
DocumentTG-MG-129 · Rev. 1 · October 2026

Typical service

½Cr-½Mo forgings for elevated-temperature service

Heat treatment

Annealed, normalised and tempered, or quenched and tempered

Chemical composition of ASTM A182 F2 (weight %)

C0.05–0.21
Mn0.30–0.80
P0.040 max
S0.040 max
Si0.10–0.60
Cr0.50–0.81
Mo0.44–0.65

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min485 MPa
Yield strength (0.2 % offset), min275 MPa
Elongation, min20 %
Hardness143–192 HBW

About chrome-moly alloy steel

Chrome-moly steels are low-alloy steels with 1–9 % chromium and 0.5–1 % molybdenum. Chromium gives oxidation and sulphidation resistance; molybdenum gives creep strength at high temperature. They are the standard choice for steam and hot hydrocarbon service above the carbon-steel range.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

International equivalents of ASTM A182 F2

All equivalents
Standard systemNearest equivalent grade
USA — ASTM / ASMEASTM A182 F2 · ASME SA-182 F2
USA — UNSK12122
Japan — JISSTPA20 / SFVAF2
China — GB / NB12CrMo (GB/T 5310 12CrMoG)
China — old GB designation12CrMo

Equivalents are the nearest commonly cited grades. Chemistry, mechanical properties and testing differ between standards — compare them before substituting one for another.

FAQ

ASTM A182 F2: common questions

What is the minimum yield strength of ASTM A182 F2?

275 MPa, with a minimum tensile strength of 485 MPa.

What is the carbon content of ASTM A182 F2?

0.05–0.21 %.

How is ASTM A182 F2 heat treated?

Annealed, normalised and tempered, or quenched and tempered.

What is the Chinese (GB) equivalent of ASTM A182 F2?

The nearest Chinese equivalent is 12CrMo (GB/T 5310 12CrMoG), formerly 12CrMo. Equivalents are close but not identical — compare chemistry and properties before substituting.

What is the JIS equivalent of ASTM A182 F2?

The nearest Japanese (JIS) equivalent is STPA20 / SFVAF2.

Does Teshi Group supply ASTM A182 F2?

Teshi Group manufactures flanges and fittings in this grade. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.