46 inch MSS SP-75 High-Test Fitting Dimensions
46 inch (DN 1150) to MSS SP-75: Pipe OD 1168 mm; 90° centre to end 1753 mm; 45° centre to end 727 mm.
Key to dimensions
- A
- 90° elbow centre to end
- B
- 45° elbow centre to end
- C
- Tee centre to end of run
- M
- Tee centre to end of outlet
- H
- Cap length / reducer end to end
46 inch MSS SP-75 High-Test Fitting Dimensions — all dimensions
MSS SP-75 elbows (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1150 | |
| Pipe OD — OD | 1168 mm | 45.98 in |
| 90° centre to end — A | 1753 mm | 69.02 in |
| 45° centre to end — B | 727 mm | 28.62 in |
MSS SP-75 tees (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1150 | |
| Pipe OD — OD | 1168 mm | 45.98 in |
| Centre to end run — C | 851 mm | 33.50 in |
| Centre to end outlet — M | 800 mm | 31.50 in |
MSS SP-75 caps (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1150 | |
| Pipe OD — OD | 1168 mm | 45.98 in |
| Length — H | 343 mm | 13.50 in |
| Length, t > 1.0 in — H* | 381 in | 9677.4 mm |
Values are nominal, from MSS SP-75 High-Test Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-75 High-Test Fitting Dimensions
Related for this size
46" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.946" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.946" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.946" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFFAQ
46 inch MSS SP-75 High-Test Fitting Dimensions: common questions
What are the 46 inch MSS SP-75 High-Test Fitting Dimensions?
46 inch (DN 1150) to MSS SP-75: Pipe OD 1168 mm; 90° centre to end 1753 mm; 45° centre to end 727 mm.
Does Teshi Group manufacture 46 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to MSS SP-75, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 46 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-75 High-Test Fitting Dimensions chart.
Need 46 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.