50 inch MSS SP-75 High-Test Fitting Dimensions
50 inch (DN 1250) to MSS SP-75: Pipe OD 1270 mm; 90° centre to end 1905 mm; 45° centre to end 787 mm.
Key to dimensions
- A
- 90° elbow centre to end
- B
- 45° elbow centre to end
- C
- Tee centre to end of run
- M
- Tee centre to end of outlet
- H
- Cap length / reducer end to end
50 inch MSS SP-75 High-Test Fitting Dimensions — all dimensions
MSS SP-75 elbows (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1250 | |
| Pipe OD — OD | 1270 mm | 50.00 in |
| 90° centre to end — A | 1905 mm | 75.00 in |
| 45° centre to end — B | 787 mm | 30.98 in |
MSS SP-75 tees (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1250 | |
| Pipe OD — OD | 1270 mm | 50.00 in |
| Centre to end run — C | 934 mm | 36.77 in |
| Centre to end outlet — M | 876 mm | 34.49 in |
MSS SP-75 caps (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1250 | |
| Pipe OD — OD | 1270 mm | 50.00 in |
| Length — H | 368 mm | 14.49 in |
| Length, t > 1.0 in — H* | 406 in | 10312.4 mm |
Values are nominal, from MSS SP-75 High-Test Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-75 High-Test Fitting Dimensions
FAQ
50 inch MSS SP-75 High-Test Fitting Dimensions: common questions
What are the 50 inch MSS SP-75 High-Test Fitting Dimensions?
50 inch (DN 1250) to MSS SP-75: Pipe OD 1270 mm; 90° centre to end 1905 mm; 45° centre to end 787 mm.
Does Teshi Group manufacture 50 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to MSS SP-75, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 50 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-75 High-Test Fitting Dimensions chart.
Need 50 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.