46 inch ASME B16.9 Butt Weld Tee Dimensions
46 inch (DN 1150) to ASME B16.9: OD at bevel 1168.0 mm; Run 851 mm; Outlet 800 mm.
Key to dimensions
- OD
- Outside diameter at the bevel
- C
- Centre-to-end, run
- M
- Centre-to-end, outlet
46 inch ASME B16.9 Butt Weld Tee Dimensions — all dimensions
Straight (equal) tees (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1150 | |
| at bevel — OD | 1168.0 mm | 45.98 in |
| Run — C | 851 mm | 33.50 in |
| Outlet — M | 800 mm | 31.50 in |
Values are nominal, from ASME B16.9 Butt Weld Tee Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.9 Butt Weld Tee Dimensions
Related for this size
46" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.946" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.946" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFFAQ
46 inch ASME B16.9 Butt Weld Tee Dimensions: common questions
What are the 46 inch ASME B16.9 Butt Weld Tee Dimensions?
46 inch (DN 1150) to ASME B16.9: OD at bevel 1168.0 mm; Run 851 mm; Outlet 800 mm.
Does Teshi Group manufacture 46 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 46 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Butt Weld Tee Dimensions chart.
Need 46 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.