38 inch ASME B16.9 Butt Weld Tee Dimensions
38 inch (DN 950) to ASME B16.9: OD at bevel 965.0 mm; Run 711 mm; Outlet 711 mm.
Key to dimensions
- OD
- Outside diameter at the bevel
- C
- Centre-to-end, run
- M
- Centre-to-end, outlet
38 inch ASME B16.9 Butt Weld Tee Dimensions — all dimensions
Straight (equal) tees (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 950 | |
| at bevel — OD | 965.0 mm | 37.99 in |
| Run — C | 711 mm | 27.99 in |
| Outlet — M | 711 mm | 27.99 in |
Values are nominal, from ASME B16.9 Butt Weld Tee Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.9 Butt Weld Tee Dimensions
Related for this size
38" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.938" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.938" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFFAQ
38 inch ASME B16.9 Butt Weld Tee Dimensions: common questions
What are the 38 inch ASME B16.9 Butt Weld Tee Dimensions?
38 inch (DN 950) to ASME B16.9: OD at bevel 965.0 mm; Run 711 mm; Outlet 711 mm.
Does Teshi Group manufacture 38 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 38 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Butt Weld Tee Dimensions chart.
Need 38 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.