ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.36FlangesTG-DS-033 · size page

6 inch ASME B16.36 Orifice Flange Dimensions

6 inch (DN 150) to ASME B16.36: OD 320 mm; Min thickness 36.6 mm; raised face 215.9 mm; hub 206 mm; length 98 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø320W (PCD) = Ø269.912 holes × Ø22.26 inch ASME B16.36 Orifice Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
T
Minimum flange thickness, excluding the raised face
R
Diameter of raised face
X
Hub diameter at base
Y
Length through hub
W
Bolt circle diameter
Holes
Number of bolt holes
Bolt
Nominal stud bolt diameter in inches
Stud
Stud bolt length for a raised-face orifice flange pair

6 inch ASME B16.36 Orifice Flange Dimensions — all dimensions

Class 300 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O320 mm12.60 in
Min thickness — T36.6 mm1.44 in
Raised face dia — R215.9 mm8.50 in
Hub dia — X206 mm8.11 in
Length thru hub — Y98 mm3.86 in
Bolt circle — W269.9 mm10.63 in
Number of holes12
Hole dia22.2 mm0.874 in
Bolt size¾"
Stud — Length135 mm5.31 in

Class 600 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O355 mm13.98 in
Min thickness — T47.7 mm1.88 in
Raised face dia — R215.9 mm8.50 in
Hub dia — X222 mm8.74 in
Length thru hub — Y117 mm4.61 in
Bolt circle — W292.1 mm11.50 in
Number of holes12
Hole dia28.6 mm1.13 in
Bolt size1"
Stud — Length180 mm7.09 in

Values are nominal, from ASME B16.36 Orifice Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

6 inch ASME B16.36 Orifice Flange Dimensions: common questions

What are the 6 inch ASME B16.36 Orifice Flange Dimensions?

6 inch (DN 150) to ASME B16.36: OD 320 mm; Min thickness 36.6 mm; raised face 215.9 mm; hub 206 mm; length 98 mm.

Does Teshi Group manufacture 6 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.36, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 6 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.36 Orifice Flange Dimensions chart.

Need 6 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote