ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.36FlangesTG-DS-033 · size page

16 inch ASME B16.36 Orifice Flange Dimensions

16 inch (DN 400) to ASME B16.36: OD 650 mm; Min thickness 55.6 mm; raised face 469.9 mm; hub 483 mm; length 144 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø650W (PCD) = Ø571.520 holes × Ø34.916 inch ASME B16.36 Orifice Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
T
Minimum flange thickness, excluding the raised face
R
Diameter of raised face
X
Hub diameter at base
Y
Length through hub
W
Bolt circle diameter
Holes
Number of bolt holes
Bolt
Nominal stud bolt diameter in inches
Stud
Stud bolt length for a raised-face orifice flange pair

16 inch ASME B16.36 Orifice Flange Dimensions — all dimensions

Class 300 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O650 mm25.59 in
Min thickness — T55.6 mm2.19 in
Raised face dia — R469.9 mm18.50 in
Hub dia — X483 mm19.02 in
Length thru hub — Y144 mm5.67 in
Bolt circle — W571.5 mm22.50 in
Number of holes20
Hole dia34.9 mm1.37 in
Bolt size1¼"
Stud — Length195 mm7.68 in

Class 600 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O685 mm26.97 in
Min thickness — T76.2 mm3.00 in
Raised face dia — R469.9 mm18.50 in
Hub dia — X495 mm19.49 in
Length thru hub — Y178 mm7.01 in
Bolt circle — W603.2 mm23.75 in
Number of holes20
Hole dia41.3 mm1.63 in
Bolt size1½"
Stud — Length260 mm10.24 in

Values are nominal, from ASME B16.36 Orifice Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

16 inch ASME B16.36 Orifice Flange Dimensions: common questions

What are the 16 inch ASME B16.36 Orifice Flange Dimensions?

16 inch (DN 400) to ASME B16.36: OD 650 mm; Min thickness 55.6 mm; raised face 469.9 mm; hub 483 mm; length 144 mm.

Does Teshi Group manufacture 16 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.36, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 16 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.36 Orifice Flange Dimensions chart.

Need 16 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote