ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
ASME B16.36FlangesTG-DS-033 · size page

10 inch ASME B16.36 Orifice Flange Dimensions

10 inch (DN 250) to ASME B16.36: OD 445 mm; Min thickness 46.1 mm; raised face 323.8 mm; hub 321 mm; length 116 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø445W (PCD) = Ø387.416 holes × Ø28.610 inch ASME B16.36 Orifice Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
T
Minimum flange thickness, excluding the raised face
R
Diameter of raised face
X
Hub diameter at base
Y
Length through hub
W
Bolt circle diameter
Holes
Number of bolt holes
Bolt
Nominal stud bolt diameter in inches
Stud
Stud bolt length for a raised-face orifice flange pair

10 inch ASME B16.36 Orifice Flange Dimensions — all dimensions

Class 300 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O445 mm17.52 in
Min thickness — T46.1 mm1.81 in
Raised face dia — R323.8 mm12.75 in
Hub dia — X321 mm12.64 in
Length thru hub — Y116 mm4.57 in
Bolt circle — W387.4 mm15.25 in
Number of holes16
Hole dia28.6 mm1.13 in
Bolt size1"
Stud — Length165 mm6.50 in

Class 600 orifice flange dimensions (mm)

DimensionValueEquivalent
Outside dia — O510 mm20.08 in
Min thickness — T63.5 mm2.50 in
Raised face dia — R323.8 mm12.75 in
Hub dia — X343 mm13.50 in
Length thru hub — Y152 mm5.98 in
Bolt circle — W431.8 mm17.00 in
Number of holes16
Hole dia34.9 mm1.37 in
Bolt size1¼"
Stud — Length220 mm8.66 in

Values are nominal, from ASME B16.36 Orifice Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

10 inch ASME B16.36 Orifice Flange Dimensions: common questions

What are the 10 inch ASME B16.36 Orifice Flange Dimensions?

10 inch (DN 250) to ASME B16.36: OD 445 mm; Min thickness 46.1 mm; raised face 323.8 mm; hub 321 mm; length 116 mm.

Does Teshi Group manufacture 10 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to ASME B16.36, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 10 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.36 Orifice Flange Dimensions chart.

Need 10 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote