ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
Chrome-molySeamless pipeTG-MG-139 · Rev. 1 · October 2026

ASTM A335 P15 — Chemical Composition & Mechanical Properties

ASTM A335 P15 is a chrome-moly alloy steel grade for seamless pipe (UNS K11578). It is also known as 1½Si-½Mo. This sheet summarises its chemical composition limits, minimum mechanical properties, heat treatment and typical service. Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings.

Download PDF Request a quoteA4 · Teshi Group document TG-MG-139 · © Teshi Group · controlled document

ASTM A335 P15 at a glance

SpecificationASTM A335 P15
Material familyChrome-moly alloy steel
Product formSeamless pipe
UNS numberK11578
Also known as1½Si-½Mo
DocumentTG-MG-139 · Rev. 1 · October 2026

Typical service

Silicon-moly piping for oxidation resistance

Heat treatment

Annealed, or normalised and tempered

Chemical composition of ASTM A335 P15 (weight %)

C0.05–0.15
Mn0.30–0.60
P0.025 max
S0.025 max
Si1.15–1.65
Mo0.44–0.65

Single values are maximums unless shown as a range or “min”.

Mechanical properties

Tensile strength, min415 MPa
Yield strength (0.2 % offset), min205 MPa
Elongation, min30 %
HardnessNot specified

About chrome-moly alloy steel

Chrome-moly steels are low-alloy steels with 1–9 % chromium and 0.5–1 % molybdenum. Chromium gives oxidation and sulphidation resistance; molybdenum gives creep strength at high temperature. They are the standard choice for steam and hot hydrocarbon service above the carbon-steel range.

Reference information compiled from the published standard for convenience. It does not replace the current edition of the governing standard, which takes precedence. Verify critical dimensions and properties before design, purchase or fabrication. Teshi Engineers & Sales Promoters (P) Ltd accepts no liability for errors or omissions.

FAQ

ASTM A335 P15: common questions

What is the minimum yield strength of ASTM A335 P15?

205 MPa, with a minimum tensile strength of 415 MPa.

What is the carbon content of ASTM A335 P15?

0.05–0.15 %.

How is ASTM A335 P15 heat treated?

Annealed, or normalised and tempered.

Does Teshi Group supply ASTM A335 P15?

Teshi Group supplies this grade as a stockist and supplier, and manufactures matching flanges and fittings. Send your size, rating and quantity to info@teshigroup.com for a quotation with EN 10204 3.1 certificates.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.