1 1/2 inch MSS SP-97 Weldolet Dimensions
1 1/2 inch (DN 40) to MSS SP-97: Height 33.3 mm; Base width 73.0 mm; Outlet OD 50.8 mm.
Key to dimensions
- A
- Height of the outlet above the run pipe
- B
- Width of the base across the run pipe
- C
- Outside diameter of the outlet at the welding end
1 1/2 inch MSS SP-97 Weldolet Dimensions — all dimensions
Standard-weight Weldolet dimensions, size-on-size (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Height — A | 33.3 mm | 1.31 in |
| Base width — B | 73.0 mm | 2.87 in |
| Outlet OD — C | 50.8 mm | 2.00 in |
Values are nominal, from MSS SP-97 Weldolet Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-97 Weldolet Dimensions
Related for this size
1½" ASME B16.11 Socket Weld Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.111½" ASME B16.11 Threaded Fitting Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M1½" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
1 1/2 inch MSS SP-97 Weldolet Dimensions: common questions
What are the 1 1/2 inch MSS SP-97 Weldolet Dimensions?
1 1/2 inch (DN 40) to MSS SP-97: Height 33.3 mm; Base width 73.0 mm; Outlet OD 50.8 mm.
Does Teshi Group manufacture 1 1/2 inch forged fittings?
Yes. Teshi Group is an OEM manufacturer in India of forged fittings to MSS SP-97, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 1 1/2 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-97 Weldolet Dimensions chart.
Need 1 1/2 inch forged fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.