1 1/2 inch ASME B16.11 Socket Weld Fitting Dimensions
1 1/2 inch (DN 40) to ASME B16.11: Socket bore 49.00 mm; Socket depth 12.5 mm; A 90° — 3000 32 mm; A 90° — 6000 38 mm; A 90° — 9000 38 mm.
Key to dimensions
- B
- Socket bore diameter (mid-point of the maximum and minimum limits)
- J
- Minimum socket depth
- A
- Centre to bottom of socket
- C
- Minimum socket wall thickness
- D
- Bore diameter of fitting (mid-point of limits)
- E
- Laying length of a full coupling
- F
- Laying length of a half coupling
- K
- Minimum end wall thickness of a cap
1 1/2 inch ASME B16.11 Socket Weld Fitting Dimensions — all dimensions
Socket weld elbows, tees and crosses (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 40 | |
| Socket bore — B | 49.00 mm | 1.93 in |
| Socket depth — J | 12.5 mm | 0.492 in |
| A 90° — 3000 | 32 mm | 1.26 in |
| A 90° — 6000 | 38 mm | 1.50 in |
| A 90° — 9000 | 38 mm | 1.50 in |
| A 45° — 3000 | 20.5 mm | 0.807 in |
| A 45° — 6000 | 25.5 mm | 1.00 in |
| A 45° — 9000 | 25.5 mm | 1.00 in |
| C min — 3000 | 5.54 mm | 0.218 in |
| C min — 6000 | 7.80 mm | 0.307 in |
| C min — 9000 | 11.12 mm | 0.438 in |
| 3000 — D | 40.85 mm | 1.61 in |
| 6000 — D | 33.95 mm | 1.34 in |
| 9000 — D | 27.95 mm | 1.10 in |
Socket weld couplings, half couplings and caps (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 40 | |
| Full coupling — E | 12.5 mm | 0.492 in |
| Half coupling — F | 32 mm | 1.26 in |
| Cap, 3000 — K | 11.2 mm | 0.441 in |
| Cap, 6000 — K | 12.7 mm | 0.500 in |
| Cap, 9000 — K | 15.7 mm | 0.618 in |
Values are nominal, from ASME B16.11 Socket Weld Fitting Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.11 Socket Weld Fitting Dimensions
Related for this size
FAQ
1 1/2 inch ASME B16.11 Socket Weld Fitting Dimensions: common questions
What are the 1 1/2 inch ASME B16.11 Socket Weld Fitting Dimensions?
1 1/2 inch (DN 40) to ASME B16.11: Socket bore 49.00 mm; Socket depth 12.5 mm; A 90° — 3000 32 mm; A 90° — 6000 38 mm; A 90° — 9000 38 mm.
Does Teshi Group manufacture 1 1/2 inch forged fittings?
Yes. Teshi Group is an OEM manufacturer in India of forged fittings to ASME B16.11, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 1 1/2 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.11 Socket Weld Fitting Dimensions chart.
Need 1 1/2 inch forged fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.