2 1/2 inch MSS SP-43 Stub End Dimensions
2 1/2 inch (DN 65) to MSS SP-43: Pipe OD 73 mm; Wall Sch 10S 3.05 mm; Lap OD 104.8 mm; Length 63.5 mm; Radius Type A 7.87 mm.
Key to dimensions
- G
- Lap outside diameter
- F
- Length
- R
- Fillet radius of lap
2 1/2 inch MSS SP-43 Stub End Dimensions — all dimensions
MSS SP-43 stub ends, short pattern (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — OD | 73 mm | 2.87 in |
| Wall Sch 10S — T | 3.05 mm | 0.120 in |
| Lap OD — G | 104.8 mm | 4.13 in |
| Length — F | 63.5 mm | 2.50 in |
| Radius Type A — R | 7.87 mm | 0.310 in |
| Radius Type B — R | 0.76 mm | 0.030 in |
Values are nominal, from MSS SP-43 Stub End Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-43 Stub End Dimensions
Related for this size
2½" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.92½" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M2½" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
2 1/2 inch MSS SP-43 Stub End Dimensions: common questions
What are the 2 1/2 inch MSS SP-43 Stub End Dimensions?
2 1/2 inch (DN 65) to MSS SP-43: Pipe OD 73 mm; Wall Sch 10S 3.05 mm; Lap OD 104.8 mm; Length 63.5 mm; Radius Type A 7.87 mm.
Does Teshi Group manufacture 2 1/2 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to MSS SP-43, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 2 1/2 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-43 Stub End Dimensions chart.
Need 2 1/2 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.