16 inch MSS SP-43 Stub End Dimensions
16 inch (DN 400) to MSS SP-43: Pipe OD 406.4 mm; Wall Sch 10S 4.78 mm; Lap OD 469.9 mm; Length 152.4 mm; Radius Type A 12.7 mm.
Key to dimensions
- G
- Lap outside diameter
- F
- Length
- R
- Fillet radius of lap
16 inch MSS SP-43 Stub End Dimensions — all dimensions
MSS SP-43 stub ends, short pattern (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — OD | 406.4 mm | 16.00 in |
| Wall Sch 10S — T | 4.78 mm | 0.188 in |
| Lap OD — G | 469.9 mm | 18.50 in |
| Length — F | 152.4 mm | 6.00 in |
| Radius Type A — R | 12.7 mm | 0.500 in |
| Radius Type B — R | 1.52 mm | 0.060 in |
Values are nominal, from MSS SP-43 Stub End Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-43 Stub End Dimensions
Related for this size
16" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.916" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.916" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.916" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M16" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
16 inch MSS SP-43 Stub End Dimensions: common questions
What are the 16 inch MSS SP-43 Stub End Dimensions?
16 inch (DN 400) to MSS SP-43: Pipe OD 406.4 mm; Wall Sch 10S 4.78 mm; Lap OD 469.9 mm; Length 152.4 mm; Radius Type A 12.7 mm.
Does Teshi Group manufacture 16 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to MSS SP-43, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 16 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-43 Stub End Dimensions chart.
Need 16 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.