ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
JIS B2220FlangesTG-DS-062 · size page

65A JIS B2220 30K Flange Dimensions

65A (DN 65) to JIS B2220: pipe OD 76.3 mm; OD 200 mm; thickness 26 mm; raised face 130 mm; PCD 160 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø200K (PCD) = Ø1608 holes × Ø23C = 26d1 = Ø13065A JIS B2220 30K Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

65A JIS B2220 30K Flange Dimensions — all dimensions

JIS B2220 30K — slip-on / blind flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A76.3 mm3.00 in
Flange OD — D200 mm7.87 in
Flange — C26 mm1.02 in
Raised face — d1130 mm5.12 in
Bolt circle — K160 mm6.30 in
Number of bolts8
Hole dia — L23 mm0.906 in
Bolt sizeM20

Values are nominal, from JIS B2220 30K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

65A JIS B2220 30K Flange Dimensions: common questions

What are the 65A JIS B2220 30K Flange Dimensions?

65A (DN 65) to JIS B2220: pipe OD 76.3 mm; OD 200 mm; thickness 26 mm; raised face 130 mm; PCD 160 mm.

Does Teshi Group manufacture 65A flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to JIS B2220, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 65A dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full JIS B2220 30K Flange Dimensions chart.

Need 65A flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote