ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
JIS B2220FlangesTG-DS-062 · size page

150A JIS B2220 30K Flange Dimensions

150A (DN 150) to JIS B2220: pipe OD 165.2 mm; OD 325 mm; thickness 38 mm; raised face 235 mm; PCD 275 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø325K (PCD) = Ø27512 holes × Ø27C = 38d1 = Ø235150A JIS B2220 30K Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

150A JIS B2220 30K Flange Dimensions — all dimensions

JIS B2220 30K — slip-on / blind flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A165.2 mm6.50 in
Flange OD — D325 mm12.80 in
Flange — C38 mm1.50 in
Raised face — d1235 mm9.25 in
Bolt circle — K275 mm10.83 in
Number of bolts12
Hole dia — L27 mm1.06 in
Bolt sizeM24

Values are nominal, from JIS B2220 30K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

150A JIS B2220 30K Flange Dimensions: common questions

What are the 150A JIS B2220 30K Flange Dimensions?

150A (DN 150) to JIS B2220: pipe OD 165.2 mm; OD 325 mm; thickness 38 mm; raised face 235 mm; PCD 275 mm.

Does Teshi Group manufacture 150A flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to JIS B2220, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 150A dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full JIS B2220 30K Flange Dimensions chart.

Need 150A flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote