ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-036 · size page

DN 1800 IS 6392 PN 2.5 Flange Dimensions

DN 1800 to IS 6392: pipe OD 1820 mm; OD 1990 mm; thickness 52 mm; raised face 1890 mm; RF height 5 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø1990K (PCD) = Ø193044 holes × Ø30C = 52H = 80N = Ø1845A = Ø1820d1 = Ø1890DN 1800 IS 6392 PN 2.5 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 1800 IS 6392 PN 2.5 Flange Dimensions — all dimensions

PN 2.5 (Table 3) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A1820 mm71.65 in
Flange OD — D1990 mm78.35 in
Flange — C52 mm2.05 in
Raised face — d11890 mm74.41 in
RF height — f5 mm0.197 in
Bolt circle — K1930 mm75.98 in
Number of bolts44
Hole dia — L30 mm1.18 in
Bolt sizeM27

PN 2.5 (Table 2) — weld-neck flanges

DimensionValueEquivalent
Pipe OD — A1820 mm71.65 in
Flange OD — D1990 mm78.35 in
Weld neck — C26 mm1.02 in
WN length — H80 mm3.15 in
Hub / neck dia — N1845 mm72.64 in
Raised face — d11890 mm74.41 in
RF height — f5 mm0.197 in
Bolt circle — K1930 mm75.98 in
Number of bolts44
Hole dia — L30 mm1.18 in
Bolt sizeM27

Values are nominal, from IS 6392 PN 2.5 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

Other sizes — IS 6392 PN 2.5 Flange Dimensions

Same size in other ratings

FAQ

DN 1800 IS 6392 PN 2.5 Flange Dimensions: common questions

What are the DN 1800 IS 6392 PN 2.5 Flange Dimensions?

DN 1800 to IS 6392: pipe OD 1820 mm; OD 1990 mm; thickness 52 mm; raised face 1890 mm; RF height 5 mm.

Does Teshi Group manufacture DN 1800 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 1800 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 2.5 Flange Dimensions chart.

Need DN 1800 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote