DN 1400 IS 6392 PN 2.5 Flange Dimensions
DN 1400 (56") to IS 6392: pipe OD 1420 mm; OD 1575 mm; thickness 42 mm; raised face 1480 mm; RF height 5 mm.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- f
- Raised face height
- N
- Neck / hub diameter at base
- H
- Length through hub / neck length
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 1400 IS 6392 PN 2.5 Flange Dimensions — all dimensions
PN 2.5 (Table 3) — plate flanges for welding (slip-on plate)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 1420 mm | 55.91 in |
| Flange OD — D | 1575 mm | 62.01 in |
| Flange — C | 42 mm | 1.65 in |
| Raised face — d1 | 1480 mm | 58.27 in |
| RF height — f | 5 mm | 0.197 in |
| Bolt circle — K | 1520 mm | 59.84 in |
| Number of bolts | 36 | |
| Hole dia — L | 30 mm | 1.18 in |
| Bolt size | M27 |
PN 2.5 (Table 2) — weld-neck flanges
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — A | 1420 mm | 55.91 in |
| Flange OD — D | 1575 mm | 62.01 in |
| Weld neck — C | 26 mm | 1.02 in |
| WN length — H | 70 mm | 2.76 in |
| Hub / neck dia — N | 1445 mm | 56.89 in |
| Raised face — d1 | 1480 mm | 58.27 in |
| RF height — f | 5 mm | 0.197 in |
| Bolt circle — K | 1520 mm | 59.84 in |
| Number of bolts | 36 | |
| Hole dia — L | 30 mm | 1.18 in |
| Bolt size | M27 |
Values are nominal, from IS 6392 PN 2.5 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — IS 6392 PN 2.5 Flange Dimensions
Same size in other ratings
FAQ
DN 1400 IS 6392 PN 2.5 Flange Dimensions: common questions
What are the DN 1400 IS 6392 PN 2.5 Flange Dimensions?
DN 1400 (56") to IS 6392: pipe OD 1420 mm; OD 1575 mm; thickness 42 mm; raised face 1480 mm; RF height 5 mm.
Does Teshi Group manufacture DN 1400 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 1400 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 2.5 Flange Dimensions chart.
Need DN 1400 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.