DN 25 EN 10253 / DIN 2605 Elbow Dimensions
DN 25 (1") to EN 10253-2: Pipe OD 33.7 mm; 90° centre to end 25 mm; 180° centre to centre 50 mm; 180° back to face 42 mm.
Key to dimensions
- D
- Pipe outside diameter
- R
- 90° centre-to-end radius
- C
- 180° return, centre to centre
- K
- 180° return, back to face
DN 25 EN 10253 / DIN 2605 Elbow Dimensions — all dimensions
EN 10253-2 90° elbows type 2D (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — D | 33.7 mm | 1.33 in |
| 90° centre to end — R | 25 mm | 0.984 in |
| 180° centre to centre — C | 50 mm | 1.97 in |
| 180° back to face — K | 42 mm | 1.65 in |
EN 10253-2 90° elbows type 3D (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — D | 33.7 mm | 1.33 in |
| 90° centre to end — R | 38 mm | 1.50 in |
| 180° centre to centre — C | 76 mm | 2.99 in |
| 180° back to face — K | 56 mm | 2.20 in |
EN 10253-2 90° elbows type 5D (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Pipe OD — D | 33.7 mm | 1.33 in |
| 90° centre to end — R | 72.5 mm | 2.85 in |
| 180° centre to centre — C | 145 mm | 5.71 in |
| 180° back to face — K | 89 mm | 3.50 in |
Values are nominal, from EN 10253 / DIN 2605 Elbow Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — EN 10253 / DIN 2605 Elbow Dimensions
Related for this size
1" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.91" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.91" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.91" ASME B16.9 Butt Weld Pipe Cap Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M1" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
DN 25 EN 10253 / DIN 2605 Elbow Dimensions: common questions
What are the DN 25 EN 10253 / DIN 2605 Elbow Dimensions?
DN 25 (1") to EN 10253-2: Pipe OD 33.7 mm; 90° centre to end 25 mm; 180° centre to centre 50 mm; 180° back to face 42 mm.
Does Teshi Group manufacture DN 25 butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to EN 10253-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 25 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 10253 / DIN 2605 Elbow Dimensions chart.
Need DN 25 butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.