DN – EN 10253 / DIN 2605 Elbow Dimensions
DN – to EN 10253-2: Pipe OD 101.6 mm; 90° centre to end 133 mm; 180° centre to centre 267 mm; 180° back to face 184 mm.
Key to dimensions
- D
- Pipe outside diameter
- R
- 90° centre-to-end radius
- C
- 180° return, centre to centre
- K
- 180° return, back to face
DN – EN 10253 / DIN 2605 Elbow Dimensions — all dimensions
EN 10253-2 90° elbows type 3D (mm)
| DN | DPipe OD | R90° centre to end | C180° centre to centre | K180° back to face |
|---|---|---|---|---|
| – | 101.6 | 133 | 267 | 184 |
| – | 108 | 142.5 | 285 | 196 |
| – | 133 | 181 | 362 | 247 |
| – | 159 | 216 | 432 | 295 |
| – | 193.7 | 270 | 540 | 367 |
| – | 244.5 | 340 | 680 | 462 |
EN 10253-2 90° elbows type 5D (mm)
| DN | DPipe OD | R90° centre to end | C180° centre to centre | K180° back to face |
|---|---|---|---|---|
| – | 38 | 82.5 | 165 | 101 |
| – | 51 | 122.5 | 245 | 149 |
| – | 57 | 130 | 260 | 158 |
| – | 70 | 160 | 320 | 195 |
| – | 101.6 | 235 | 470 | 286 |
| – | 108 | 253 | 506 | 306 |
| – | 133 | 311.5 | 623 | 378 |
| – | 159 | 375 | 750 | 454 |
| – | 244.5 | 580 | 1160 | 702 |
Values are nominal, from EN 10253 / DIN 2605 Elbow Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
FAQ
DN – EN 10253 / DIN 2605 Elbow Dimensions: common questions
What are the DN – EN 10253 / DIN 2605 Elbow Dimensions?
DN – to EN 10253-2: Pipe OD 101.6 mm; 90° centre to end 133 mm; 180° centre to centre 267 mm; 180° back to face 184 mm.
Does Teshi Group manufacture DN – butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to EN 10253-2, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN – dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 10253 / DIN 2605 Elbow Dimensions chart.
Need DN – butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.