ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
AWWA C207FlangesTG-DS-065 · size page

48 inch AWWA C207 Class E Flange Dimensions

48 inch (DN 1200) to AWWA C207: OD 59.5 in; PCD 56 in; bolts 44; holes 1.625 in; thickness 3.5 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø59.5"K (PCD) = Ø56"44 holes × Ø1.625"C = 3.5"H = 4.125"N = Ø52.25"48 inch AWWA C207 Class E Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

48 inch AWWA C207 Class E Flange Dimensions — all dimensions

Class E — steel ring (slip-on) flange, 275 psi — inches

DimensionValueEquivalent
Flange OD — D59.5 in1511.3 mm
Bolt circle — K56 in1422.4 mm
Number of bolts44
Hole dia — L1.625 in41.3 mm
Slip-on ring — C3.5 in88.9 mm

Class E — steel hub flange, 275 psi — inches

DimensionValueEquivalent
Flange OD — D59.5 in1511.3 mm
Bolt circle — K56 in1422.4 mm
Number of bolts44
Hole dia — L1.625 in41.3 mm
Hub flange — C2.75 in69.8 mm
Overall length incl. hub — H4.125 in104.8 mm
Hub / neck dia — N52.25 in1327.1 mm

Values are nominal, from AWWA C207 Class E Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

48 inch AWWA C207 Class E Flange Dimensions: common questions

What are the 48 inch AWWA C207 Class E Flange Dimensions?

48 inch (DN 1200) to AWWA C207: OD 59.5 in; PCD 56 in; bolts 44; holes 1.625 in; thickness 3.5 in.

Does Teshi Group manufacture 48 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to AWWA C207, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 48 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full AWWA C207 Class E Flange Dimensions chart.

Need 48 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote