ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
AWWA C207FlangesTG-DS-065 · size page

10 inch AWWA C207 Class E Flange Dimensions

10 inch (DN 250) to AWWA C207: OD 16 in; PCD 14.25 in; bolts 12; holes 1 in; thickness 1.563 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø16"K (PCD) = Ø14.25"12 holes × Ø1"C = 1.563"H = 1.938"N = Ø12"10 inch AWWA C207 Class E Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
C
Flange thickness, excluding raised face unless stated
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

10 inch AWWA C207 Class E Flange Dimensions — all dimensions

Class E — steel ring (slip-on) flange, 275 psi — inches

DimensionValueEquivalent
Flange OD — D16 in406.4 mm
Bolt circle — K14.25 in361.9 mm
Number of bolts12
Hole dia — L1 in25.4 mm
Slip-on ring — C1.563 in39.7 mm

Class E — steel hub flange, 275 psi — inches

DimensionValueEquivalent
Flange OD — D16 in406.4 mm
Bolt circle — K14.25 in361.9 mm
Number of bolts12
Hole dia — L1 in25.4 mm
Hub flange — C1.188 in30.2 mm
Overall length incl. hub — H1.938 in49.2 mm
Hub / neck dia — N12 in304.8 mm

Values are nominal, from AWWA C207 Class E Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

10 inch AWWA C207 Class E Flange Dimensions: common questions

What are the 10 inch AWWA C207 Class E Flange Dimensions?

10 inch (DN 250) to AWWA C207: OD 16 in; PCD 14.25 in; bolts 12; holes 1 in; thickness 1.563 in.

Does Teshi Group manufacture 10 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to AWWA C207, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 10 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full AWWA C207 Class E Flange Dimensions chart.

Need 10 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote