44 inch ASME B16.9 Butt Weld Pipe Cap Dimensions
44 inch (DN 1100) to ASME B16.9: OD at bevel 1118.0 mm; Length 343 mm.
Key to dimensions
- OD
- Outside diameter at the bevel
- E
- Length for wall thickness up to the limiting value
- E1
- Length for wall thickness above the limiting value
44 inch ASME B16.9 Butt Weld Pipe Cap Dimensions — all dimensions
Butt weld caps (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 1100 | |
| at bevel — OD | 1118.0 mm | 44.02 in |
| Length — E | 343 mm | 13.50 in |
Values are nominal, from ASME B16.9 Butt Weld Pipe Cap Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.9 Butt Weld Pipe Cap Dimensions
Related for this size
44" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.944" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.944" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFFAQ
44 inch ASME B16.9 Butt Weld Pipe Cap Dimensions: common questions
What are the 44 inch ASME B16.9 Butt Weld Pipe Cap Dimensions?
44 inch (DN 1100) to ASME B16.9: OD at bevel 1118.0 mm; Length 343 mm.
Does Teshi Group manufacture 44 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 44 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Butt Weld Pipe Cap Dimensions chart.
Need 44 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.