3/4 inch ASME B16.9 Butt Weld Pipe Cap Dimensions
3/4 inch (DN 20) to ASME B16.9: OD at bevel 26.7 mm; Length 25 mm; Limiting wall — for length E 3.81 mm; Length, heavier wall 25 mm.
Key to dimensions
- OD
- Outside diameter at the bevel
- E
- Length for wall thickness up to the limiting value
- E1
- Length for wall thickness above the limiting value
3/4 inch ASME B16.9 Butt Weld Pipe Cap Dimensions — all dimensions
Butt weld caps (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| DN | 20 | |
| at bevel — OD | 26.7 mm | 1.05 in |
| Length — E | 25 mm | 0.984 in |
| Limiting wall — for length E | 3.81 mm | 0.150 in |
| Length, heavier wall — E1 | 25 mm | 0.984 in |
Values are nominal, from ASME B16.9 Butt Weld Pipe Cap Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — ASME B16.9 Butt Weld Pipe Cap Dimensions
Related for this size
¾" ASME B16.9 Butt Weld Elbow Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.9¾" ASME B16.9 Butt Weld Tee Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.9¾" ASME B16.9 Butt Weld Reducer Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M¾" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
3/4 inch ASME B16.9 Butt Weld Pipe Cap Dimensions: common questions
What are the 3/4 inch ASME B16.9 Butt Weld Pipe Cap Dimensions?
3/4 inch (DN 20) to ASME B16.9: OD at bevel 26.7 mm; Length 25 mm; Limiting wall — for length E 3.81 mm; Length, heavier wall 25 mm.
Does Teshi Group manufacture 3/4 inch butt weld fittings?
Yes. Teshi Group is an OEM manufacturer in India of butt weld fittings to ASME B16.9, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 3/4 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full ASME B16.9 Butt Weld Pipe Cap Dimensions chart.
Need 3/4 inch butt weld fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.