Stockist & supplier IS 808 · IS 2062
Steel Channels — ISMC to IS 808
Steel channels are hot-rolled C-shaped sections used for frames, purlins, bracing and supports. Teshi Group stocks and supplies ISMC channels to IS 808 in IS 2062 grades, and parallel flange channels against order. Quotes are sent in 24–48 hours.
Also called: ISMC channel, C-channel, MS channel, U-channel, PFC parallel flange channel
What is a Steel Channel?
A channel has a web and two flanges on one side, giving a flat back that bolts or welds easily against other members. ISMC (Indian Standard Medium Channel) sections are rolled to IS 808 with tapered flanges; parallel flange channels (PFC) have uniform flange thickness. Channels are used as secondary beams, purlins, frame members, bracing, base frames for pumps and skids, and trimmers around openings. Back-to-back channels are also used as built-up columns and pipe supports.
Key features
- Stockist and supplier — sourced from rolling mills; Teshi does not manufacture channels
- ISMC 75 to ISMC 400 to IS 808
- Materials IS 2062 E250 and E350
- Parallel flange channels against order
- Mill test certificates with heat numbers
- Can be ordered together with flanges, fittings and fabrications manufactured by Teshi
Specification
| Supply | Stockist & supplier — Teshi Group, India, India |
|---|---|
| Dimensional standard | IS 808 (ISMC) |
| Sizes | ISMC 75–400; other sections against order |
| Material | IS 2062 E250 (A, BR, B0, C), E350; ASTM A36 against order |
| Lengths | Mill lengths or as ordered |
| Finish | As rolled; primed or galvanised against order |
| Documents | Mill test certificate to EN 10204 3.1; third-party inspection when the order specifies |
Applications
- Purlins and side rails in sheds
- Pump and equipment base frames
- Pipe supports and shoes
- Bracing and secondary framing
- Cable trays and trench covers framing
Technical data sheets
Dimensions & weights
Material grades
All gradesFAQ
Steel Channel: common questions
What does ISMC stand for?
Indian Standard Medium Channel. ISMC sizes are designated by depth in millimetres, for example ISMC 150 is 150 mm deep, with dimensions and weights given in IS 808.
Which grade is normally supplied?
IS 2062 E250 is the standard grade for channels; E350 is used for higher strength. Specify the sub-grade (A, BR, B0 or C) if impact testing is required.
Where can I find ISMC weights?
Our IS 808 ISMC chart lists depth, flange width, thicknesses and weight per metre for each size. Weights are nominal and are useful for estimating tonnage and transport.
Does Teshi manufacture steel channels?
No. Teshi Group is a stockist and supplier of Steel Channel, sourced from established mills and supplied with the original mill test certificate. Teshi is an OEM manufacturer of flanges, fittings, fasteners, valves and custom fabrications, which can be ordered with it.
Need a size or grade not listed here?
We source against your specification from approved mills, with mill test certificates and inspection before dispatch.
Send us your specificationTraceability
From mill heat to your site
- 01
Approved mill material
Received against the mill certificate; heat number registered.
- 02
Forging & machining
Heat number carried through every stage in our Indian works.
- 03
PMI, dimensional & NDT
Every lot inspected to the governing standard; TPI witness on request.
- 04
Stamped & certified dispatch
Hard-stamped pieces with EN 10204 3.1 / 3.2 certificates.
Quick RFQ