3 x 1/2 inch MSS SP-95 Swage Nipple & Bull Plug Dimensions
3 x 1/2 inch to MSS SP-95: Large end 3.500 in; Small end 0.840 in; Length 8.00 in.
Key to dimensions
- A
- End-to-end length
- OD
- Outside diameter of the large / small end
3 x 1/2 inch MSS SP-95 Swage Nipple & Bull Plug Dimensions — all dimensions
MSS SP-95 swage nipples (inches)
| Dimension | Value | Equivalent |
|---|---|---|
| Large end — OD | 3.500 in | 88.9 mm |
| Small end — OD1 | 0.840 in | 21.3 mm |
| Length — A | 8.00 in | 203.2 mm |
Values are nominal, from MSS SP-95 Swage Nipple & Bull Plug Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — MSS SP-95 Swage Nipple & Bull Plug Dimensions
FAQ
3 x 1/2 inch MSS SP-95 Swage Nipple & Bull Plug Dimensions: common questions
What are the 3 x 1/2 inch MSS SP-95 Swage Nipple & Bull Plug Dimensions?
3 x 1/2 inch to MSS SP-95: Large end 3.500 in; Small end 0.840 in; Length 8.00 in.
Does Teshi Group manufacture 3 x 1/2 inch forged fittings?
Yes. Teshi Group is an OEM manufacturer in India of forged fittings to MSS SP-95, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the 3 x 1/2 inch dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-95 Swage Nipple & Bull Plug Dimensions chart.
Need 3 x 1/2 inch forged fittings?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.
Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.