ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
MSS SP-44FlangesTG-DS-074 · size page

42 inch MSS SP-44 Class 900 Flange Dimensions

42 inch (DN 1050) to MSS SP-44: OD 61.50 in; thickness 8.12 in; hub 46.31 in; length 14.62 in; raised face 47.75 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø61.50"W (PCD) = Ø54.75"24 holes × Ø3.62"tf = 8.12"Y = 14.62"X = Ø46.31"R = Ø47.75"42 inch MSS SP-44 Class 900 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
tf
Minimum flange thickness
X
Hub diameter at base
Y
Length through hub
R
Raised face diameter
W
Bolt circle diameter
Bolts
Number of bolts
Hole
Bolt hole diameter
Bolt
Bolt diameter

42 inch MSS SP-44 Class 900 Flange Dimensions — all dimensions

MSS SP-44 Class 900 weld neck / blind flange dimensions (inches)

DimensionValueEquivalent
Flange OD — O61.50 in1562.1 mm
Min. thickness — tf8.12 in206.2 mm
Hub dia — X46.31 in1176.3 mm
Length thru hub — Y14.62 in371.3 mm
Raised face — R47.75 in1212.8 mm
Bolt circle — W54.75 in1390.6 mm
Number of bolts24
Dia — Hole3.62 in91.9 mm
Bolt size3-1/2

Values are nominal, from MSS SP-44 Class 900 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

42 inch MSS SP-44 Class 900 Flange Dimensions: common questions

What are the 42 inch MSS SP-44 Class 900 Flange Dimensions?

42 inch (DN 1050) to MSS SP-44: OD 61.50 in; thickness 8.12 in; hub 46.31 in; length 14.62 in; raised face 47.75 in.

Does Teshi Group manufacture 42 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to MSS SP-44, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 42 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-44 Class 900 Flange Dimensions chart.

Need 42 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote