ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
MSS SP-44FlangesTG-DS-070 · size page

56 inch MSS SP-44 Class 150 Flange Dimensions

56 inch (DN 1400) to MSS SP-44: OD 68.75 in; thickness 4.88 in; hub 57.38 in; raised face 62.00 in; bolt circle 65.00 in.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
O = Ø68.75"W (PCD) = Ø65.00"48 holes × Ø1.88"tf = 4.88"R = Ø62.00"56 inch MSS SP-44 Class 150 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

O
Outside diameter of flange
tf
Minimum flange thickness
X
Hub diameter at base
Y
Length through hub
R
Raised face diameter
W
Bolt circle diameter
Bolts
Number of bolts
Hole
Bolt hole diameter
Bolt
Bolt diameter

56 inch MSS SP-44 Class 150 Flange Dimensions — all dimensions

MSS SP-44 Class 150 weld neck / blind flange dimensions (inches)

DimensionValueEquivalent
Flange OD — O68.75 in1746.2 mm
Min. thickness — tf4.88 in124.0 mm
Hub dia — X57.38 in1457.5 mm
Raised face — R62.00 in1574.8 mm
Bolt circle — W65.00 in1651.0 mm
Number of bolts48
Dia — Hole1.88 in47.8 mm
Bolt size1-3/4

Values are nominal, from MSS SP-44 Class 150 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

56 inch MSS SP-44 Class 150 Flange Dimensions: common questions

What are the 56 inch MSS SP-44 Class 150 Flange Dimensions?

56 inch (DN 1400) to MSS SP-44: OD 68.75 in; thickness 4.88 in; hub 57.38 in; raised face 62.00 in; bolt circle 65.00 in.

Does Teshi Group manufacture 56 inch flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to MSS SP-44, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 56 inch dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full MSS SP-44 Class 150 Flange Dimensions chart.

Need 56 inch flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote