ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
JIS B2220FlangesTG-DS-061 · size page

750A JIS B2220 20K Flange Dimensions

750A (DN 750) to JIS B2220: pipe OD 762.0 mm; OD 1080 mm; thickness 68 mm; raised face 900 mm; PCD 970 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø1080K (PCD) = Ø97024 holes × Ø56C = 68d1 = Ø900750A JIS B2220 20K Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

750A JIS B2220 20K Flange Dimensions — all dimensions

JIS B2220 20K — slip-on / blind flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A762.0 mm30.00 in
Flange OD — D1080 mm42.52 in
Flange — C68 mm2.68 in
Raised face — d1900 mm35.43 in
Bolt circle — K970 mm38.19 in
Number of bolts24
Hole dia — L56 mm2.20 in
Bolt sizeM52×3

Values are nominal, from JIS B2220 20K Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

750A JIS B2220 20K Flange Dimensions: common questions

What are the 750A JIS B2220 20K Flange Dimensions?

750A (DN 750) to JIS B2220: pipe OD 762.0 mm; OD 1080 mm; thickness 68 mm; raised face 900 mm; PCD 970 mm.

Does Teshi Group manufacture 750A flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to JIS B2220, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the 750A dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full JIS B2220 20K Flange Dimensions chart.

Need 750A flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote