ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-042 · size page

DN 80 IS 6392 PN 64 Flange Dimensions

DN 80 (3") to IS 6392: pipe OD 88.9 mm; OD 215 mm; thickness 30 mm; raised face 138 mm; RF height 3 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø215K (PCD) = Ø1708 holes × Ø22C = 30H = 72N = Ø112A = Ø88.9d1 = Ø138DN 80 IS 6392 PN 64 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 80 IS 6392 PN 64 Flange Dimensions — all dimensions

PN 64 (Table 34) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A88.9 mm3.50 in
Flange OD — D215 mm8.46 in
Flange — C30 mm1.18 in
Raised face — d1138 mm5.43 in
RF height — f3 mm0.118 in
Bolt circle — K170 mm6.69 in
Number of bolts8
Hole dia — L22 mm0.866 in
Bolt sizeM20

PN 64 (Table 33) — weld-neck flanges

DimensionValueEquivalent
Pipe OD — A88.9 mm3.50 in
Flange OD — D215 mm8.46 in
Weld neck — C28 mm1.10 in
WN length — H72 mm2.83 in
Hub / neck dia — N112 mm4.41 in
Raised face — d1138 mm5.43 in
RF height — f3 mm0.118 in
Bolt circle — K170 mm6.69 in
Number of bolts8
Hole dia — L22 mm0.866 in
Bolt sizeM20

Values are nominal, from IS 6392 PN 64 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 80 IS 6392 PN 64 Flange Dimensions: common questions

What are the DN 80 IS 6392 PN 64 Flange Dimensions?

DN 80 (3") to IS 6392: pipe OD 88.9 mm; OD 215 mm; thickness 30 mm; raised face 138 mm; RF height 3 mm.

Does Teshi Group manufacture DN 80 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 80 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 64 Flange Dimensions chart.

Need DN 80 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote