ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
IS 6392FlangesTG-DS-041 · size page

DN 350 IS 6392 PN 40 Flange Dimensions

DN 350 (14") to IS 6392: pipe OD 355.6 mm; OD 580 mm; thickness 56 mm; raised face 465 mm; RF height 4 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø580K (PCD) = Ø51016 holes × Ø36C = 56H = 125N = Ø408A = Ø355.6d1 = Ø465DN 350 IS 6392 PN 40 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
f
Raised face height
N
Neck / hub diameter at base
H
Length through hub / neck length
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 350 IS 6392 PN 40 Flange Dimensions — all dimensions

PN 40 (Table 28) — plate flanges for welding (slip-on plate)

DimensionValueEquivalent
Pipe OD — A355.6 mm14.00 in
Flange OD — D580 mm22.83 in
Flange — C56 mm2.20 in
Raised face — d1465 mm18.31 in
RF height — f4 mm0.157 in
Bolt circle — K510 mm20.08 in
Number of bolts16
Hole dia — L36 mm1.42 in
Bolt sizeM33

PN 40 (Table 27 weld-neck + Table 31 blind) — thickness, neck and drilling

DimensionValueEquivalent
Pipe OD — A355.6 mm14.00 in
Flange OD — D580 mm22.83 in
Weld neck — C46 mm1.81 in
WN length — H125 mm4.92 in
Hub / neck dia — N408 mm16.06 in
Raised face — d1465 mm18.31 in
RF height — f4 mm0.157 in
Bolt circle — K510 mm20.08 in
Number of bolts16
Hole dia — L36 mm1.42 in
Bolt sizeM33

Values are nominal, from IS 6392 PN 40 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 350 IS 6392 PN 40 Flange Dimensions: common questions

What are the DN 350 IS 6392 PN 40 Flange Dimensions?

DN 350 (14") to IS 6392: pipe OD 355.6 mm; OD 580 mm; thickness 56 mm; raised face 465 mm; RF height 4 mm.

Does Teshi Group manufacture DN 350 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to IS 6392, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 350 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full IS 6392 PN 40 Flange Dimensions chart.

Need DN 350 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote