ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
EN 1092-1FlangesTG-DS-068 · size page

DN 32 EN 1092-1 PN63 Flange Dimensions

DN 32 (1 1/4") to EN 1092-1: pipe OD 42.4 mm; OD 155 mm; PCD 110 mm; bolts 4; holes 22 mm.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø155K (PCD) = Ø1104 holes × Ø22C = 24d1 = Ø78DN 32 EN 1092-1 PN63 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

D
Outside diameter of flange
A
Pipe outside diameter (hub diameter at the weld end)
C
Flange thickness, excluding raised face unless stated
d1
Raised face diameter
K
Bolt circle (pitch circle) diameter
n
Number of bolts
L
Bolt hole diameter
Bolt
Bolt size (metric M or inch diameter)

DN 32 EN 1092-1 PN63 Flange Dimensions — all dimensions

EN 1092-1 PN 63 flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A42.4 mm1.67 in
Flange OD — D155 mm6.10 in
Bolt circle — K110 mm4.33 in
Number of bolts4
Hole dia — L22 mm0.866 in
Bolt sizeM20
Plate (Type 01) — C24 mm0.945 in
Blind / weld neck — C24 mm0.945 in
Raised face — d178 mm3.07 in

Values are nominal, from EN 1092-1 PN63 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 32 EN 1092-1 PN63 Flange Dimensions: common questions

What are the DN 32 EN 1092-1 PN63 Flange Dimensions?

DN 32 (1 1/4") to EN 1092-1: pipe OD 42.4 mm; OD 155 mm; PCD 110 mm; bolts 4; holes 22 mm.

Does Teshi Group manufacture DN 32 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 32 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN63 Flange Dimensions chart.

Need DN 32 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote