ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
EN 1092-1FlangesTG-DS-032 · size page

DN 450 EN 1092-1 PN40 Flange Dimensions

DN 450 (18") to EN 1092-1: pipe OD 457.0 mm; OD 685 mm; PCD 610 mm; holes 39 mm; bolts 20.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø685K (PCD) = Ø61020 holes × Ø39DN 450 EN 1092-1 PN40 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

A
Pipe outside diameter (EN 10220 / ISO series 1)
D
Outside diameter of flange
K
Bolt circle (pitch circle) diameter
L
Bolt hole diameter
n
Number of bolts
C1
Thickness of plate flange (Type 01)
C2
Thickness of weld neck and blind flanges (Types 11 and 05)

DN 450 EN 1092-1 PN40 Flange Dimensions — all dimensions

EN 1092-1 PN40 flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A457.0 mm17.99 in
Flange OD — D685 mm26.97 in
Bolt circle — K610 mm24.02 in
Hole dia — L39 mm1.54 in
Number of bolts20
Bolt sizeM36
Plate flange — C166 mm2.60 in
Weld neck / blind — C257 mm2.24 in

Values are nominal, from EN 1092-1 PN40 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 450 EN 1092-1 PN40 Flange Dimensions: common questions

What are the DN 450 EN 1092-1 PN40 Flange Dimensions?

DN 450 (18") to EN 1092-1: pipe OD 457.0 mm; OD 685 mm; PCD 610 mm; holes 39 mm; bolts 20.

Does Teshi Group manufacture DN 450 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 450 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN40 Flange Dimensions chart.

Need DN 450 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote