ISO 9001:2015IBR ApprovedEstablished 1971Full Material Traceability
GroupRequest a quote
EN 1092-1FlangesTG-DS-031 · size page

DN 40 EN 1092-1 PN25 Flange Dimensions

DN 40 (1 1/2") to EN 1092-1: pipe OD 48.3 mm; OD 150 mm; PCD 110 mm; holes 18 mm; bolts 4.

Full chart — all sizesRequest a quoteWatermarked, print-ready A4 · © Teshi Group
D = Ø150K (PCD) = Ø1104 holes × Ø18DN 40 EN 1092-1 PN25 Flange Dimensions — drawn to scale from the tabulated dimensions (front view and half section)

Key to dimensions

A
Pipe outside diameter (EN 10220 / ISO series 1)
D
Outside diameter of flange
K
Bolt circle (pitch circle) diameter
L
Bolt hole diameter
n
Number of bolts
C1
Thickness of plate flange (Type 01)
C2
Thickness of weld neck and blind flanges (Types 11 and 05)

DN 40 EN 1092-1 PN25 Flange Dimensions — all dimensions

EN 1092-1 PN25 flange dimensions (mm)

DimensionValueEquivalent
Pipe OD — A48.3 mm1.90 in
Flange OD — D150 mm5.91 in
Bolt circle — K110 mm4.33 in
Hole dia — L18 mm0.709 in
Number of bolts4
Bolt sizeM16
Plate flange — C118 mm0.709 in
Weld neck / blind — C216 mm0.630 in

Values are nominal, from EN 1092-1 PN25 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.

Find another size or standard

Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.

FAQ

DN 40 EN 1092-1 PN25 Flange Dimensions: common questions

What are the DN 40 EN 1092-1 PN25 Flange Dimensions?

DN 40 (1 1/2") to EN 1092-1: pipe OD 48.3 mm; OD 150 mm; PCD 110 mm; holes 18 mm; bolts 4.

Does Teshi Group manufacture DN 40 flanges?

Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.

Can I download the DN 40 dimensions as a PDF?

Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN25 Flange Dimensions chart.

Need DN 40 flanges?

Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?

Share your drawing, bill of materials or technical requirements with the Teshi team.

CallWhatsAppGet quote