DN 500 EN 1092-1 PN100 Flange Dimensions
DN 500 (20") to EN 1092-1: OD 870 mm; PCD 760 mm; bolts 20; holes 56 mm; bolt size M52.
Key to dimensions
- D
- Outside diameter of flange
- A
- Pipe outside diameter (hub diameter at the weld end)
- C
- Flange thickness, excluding raised face unless stated
- d1
- Raised face diameter
- K
- Bolt circle (pitch circle) diameter
- n
- Number of bolts
- L
- Bolt hole diameter
- Bolt
- Bolt size (metric M or inch diameter)
DN 500 EN 1092-1 PN100 Flange Dimensions — all dimensions
EN 1092-1 PN 100 flange dimensions (mm)
| Dimension | Value | Equivalent |
|---|---|---|
| Flange OD — D | 870 mm | 34.25 in |
| Bolt circle — K | 760 mm | 29.92 in |
| Number of bolts | 20 | |
| Hole dia — L | 56 mm | 2.20 in |
| Bolt size | M52 | |
| Plate (Type 01) — C | 128 mm | 5.04 in |
Values are nominal, from EN 1092-1 PN100 Flange Dimensions. Verify critical dimensions against the current edition of the standard before design, purchase or fabrication.
Find another size or standard
Pick a product, standard and size — or just type — to see every dimension and download a watermarked PDF for that one size.
Other sizes — EN 1092-1 PN100 Flange Dimensions
Same size in other ratings
Related for this size
20" Stud Bolt Chart for ASME B16.5 Flanges
Same size — open the dimensions page.
View online · PDFASME B16.2020" ASME B16.20 Spiral Wound Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B16.2120" ASME B16.21 Non-Metallic Flat Gasket Dimensions
Same size — open the dimensions page.
View online · PDFASME B36.10M20" Pipe Schedule Chart — ASME B36.10M
Same size — open the dimensions page.
View online · PDFFAQ
DN 500 EN 1092-1 PN100 Flange Dimensions: common questions
What are the DN 500 EN 1092-1 PN100 Flange Dimensions?
DN 500 (20") to EN 1092-1: OD 870 mm; PCD 760 mm; bolts 20; holes 56 mm; bolt size M52.
Does Teshi Group manufacture DN 500 flanges?
Yes. Teshi Group is an OEM manufacturer in India of flanges to EN 1092-1, in carbon, alloy, stainless, duplex, super duplex, nickel alloys, titanium and Cu-Ni, with EN 10204 3.1 certificates.
Can I download the DN 500 dimensions as a PDF?
Yes. Use “Download PDF for this size” on this page to get a single-size, print-ready PDF with the drawing and every tabulated dimension, or download the full EN 1092-1 PN100 Flange Dimensions chart.
Need DN 500 flanges?
Teshi Group manufactures them in India — send your size, rating and material and get a quote in 24–48 hours.

Ready to build to spec?
Share your drawing, bill of materials or technical requirements with the Teshi team.